Audio-Technica AT5045P Pair of AT5045 Studio Microphones
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The AT5045P is two of Audio-Technica’s premier condenser instrument microphones in a stereo pair pack. Offering the performance of a large-diaphragm, side-address condenser in a convenient, stick-type body, the AT5045, despite the space limitations imposed by its housing,boasts Audio-Technica’s largest single diaphragm. The instrument microphone’s circuitry has been honed to the essentials, allowing the AT5045 to achieve an unprecedented dynamic range that’s one of the widest of any microphone on the market. Every AT5045 is hand assembled and individually inspected for 100% quality control. Each microphone is enclosed in an elegant housing of aluminum and brass with a high-quality gray finish for durability and low reflectivity. Discrete components have been selected for optimized performance. The circuitry and capsule assembly are mounted as a single block within a floating internal shock mount, effectively decoupling the capsule from the microphone body for excellent vibration isolation. In fact, every aspect of the microphone has been carefully considered to minimize any negative effects on the audio signal.
Tehničke specifikacije proizvoda
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 20 – 20,000 Hz
- OPEN CIRCUIT SENSITIVITY –35 dB (17.7 mV) re 1V at 1 Pa
- IMPEDANCE 100 ohms
- MAXIMUM INPUT SOUND LEVEL 149 dB SPL, 1 kHz at 1% T.H.D.
- NOISE 8 dB SPL
- DYNAMIC RANGE (typical) 141 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 86 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 48V DC, 1.4 mA typical
- WEIGHT 197 g (7.0 oz)
- DIMENSIONS 177.0 mm (6.97'') long, 25.0 mm (0.98'') maximum body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED Two AT8481 isolation clamp for 5/8"-27 threaded stands; two AT8165 windscreen; protective carrying case
- AUDIO-TECHNICA CASE STYLE R11