Audio-Technica AT8033 kardioidni kondenzatorski mikrofon
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
Ideal for general audio acquisition such as interviews, acoustic guitar, percussion, overheads, vocals and more, the AT8033 features high-SPL capability and wide frequency response. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic excels in both studio and stage applications. It operates on battery or phantom power. All-purpose condenser microphone ideal for handheld interviews and general audio acquisition, Excels in both studio and stage applications, Outstanding linearity both on- and off-axis, Features high SPL capability and wide frequency response, Operates on battery or phantom power, RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Tehničke specifikacije proizvoda
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: 45 dB (5.6 mV) re 1V at 1 Pa
- Impedance: Phantom: 250 ohms Battery: 300 ohms
- Maximum Input Sound Level: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: Phantom: 113 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
- Phantom Power Requiremens: 11-52V DC, 2 mA typical
- Battery Type: 1.5V AA/UM3
- Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
- Switch: Flat, roll-off
- Weight: 159 g (5.6 oz)
- Dimensions: 194.2 mm (7.65") long, 26.0 mm (1.02") head diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; battery; soft protective pouch