Audio-Technica AT897 Kondenzatorski Line+Gradient shotgun mikrofon (279mm)
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
Audio-Technica’s AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
Tehničke specifikacije proizvoda
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Line + gradient
- FREQUENCY RESPONSE 20-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
- OPEN CIRCUIT SENSITIVITY Phantom: -40 dB (10.0 mV) re 1V at 1 Pa, Battery: -41 dB (8.9 mV) re 1V at 1 Pa
- IMPEDANCE Phantom: 200 ohms, Battery: 300 ohms
- MAXIMUM INPUT SOUND LEVEL Phantom: 129 dB SPL, 1 kHz at 1% T.H.D., Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) Phantom: 112 dB, 1 kHz at Max SPL, Battery: 98 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 77 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
- BATTERY TYPE 1.5V AA/UM3
- BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical (alkaline)
- SWITCH Flat, roll-off (recessed)
- WEIGHT 5.1 oz (145 g)
- DIMENSIONS 10.98" (279.0 mm) long, 0.83" (21.0 mm) diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; battery; 5/8"-27 to 3/8"-16 threaded adapter; protective carrying case