Audio-Technica ES905CL Kondenzatorski kardioidni Rigid-Pipe mikrofon
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The new Engineered Sound®. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI. The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.
Tehničke specifikacije proizvoda
- ELEMENT Fixed-charge back plate permanently polarized condenser
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 60-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
- OPEN CIRCUIT SENSITIVITY –38 dB (12.5 mV) re 1V at 1 Pa
- IMPEDANCE 250 ohms
- MAXIMUM INPUT SOUND LEVEL 138 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) 111 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 67 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
- WEIGHT (MICROPHONE) 330 g (11.6 oz)
- WEIGHT (POWER MODULE) 81 g (2.9 oz)
- DIMENSIONS (MICROPHONE) 523.4 mm (20.61") long, 24.6 mm (0.97") head diameter
- DIMENSIONS (POWER MODULE) 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
- OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
- CABLE 2.9 m (9.5') long, (permanently attached to microphone) 3.2 mm (0.13") diameter, 2-conductor, shielded cable terminated with TA3F-type connector
- OPTIONAL INTERCHANGEABLE ELEMENTS ESE-H hypercardioid (100°); ESE-O omnidirectional (360°
- ACCESSORIES FURNISHED AT8538 power module; (3) #8 x 1" black oxide wood screws for microphone mount
- AUDIO-TECHNICA CASE STYLE M37