Audio-Technica ES945W Kondenzatorski omnidirekcioni ugradni mikrofon u beloj boji
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
With its low-profile design that mounts unobtrusively in tabletops for minimum visibility, the ES945/LED omnidirectional condenser boundary microphone provides clear, highly intelligible audio that is perfect for sound reinforcement, professional recording and teleconferencing, television and other demanding sound pickup applications. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone’s omnidirectional polar pattern affords a 360° pickup angle, while its UniGuard® RFI-shielding technology provides outstanding rejection of radio frequency interference (RFI). Users can easily toggle between mute and live audio thanks to the microphone’s capacitive-type touch-sensitive switch. An integral Red/Green LED ring indicates the mute status, staying green when the microphone is live and turning red when it is muted. Additionally, the ES945/LED is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone is available in two colors: black (ES945/LED) and silver (ES945SV/LED). A pair of isolators is included for optional mechanical isolation from the mounting surface.
Tehničke specifikacije proizvoda
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Omnidirectional
- FREQUENCY RESPONSE 40-19,000 Hz
- OPEN CIRCUIT SENSITIVITY –40 dB (10 mV) re 1V at 1 Pa
- IMPEDANCE 200 ohms
- MAXIMUM INPUT SOUND LEVEL 142 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) 113 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 5.7 mA typical
- SWITCH Touch-sensitive control: on/mute
- WEIGHT 65 g (2.3 oz)
- DIMENSIONS 84.8 mm (3.33") long, 38.0 mm (1.49") diameter, 48.0 mm (1.89") maximum width
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORY FURNISHED One pair isolators