DBX 234s Stereo 2/3-way, Mono 4-way Crossover
Nema na zalihama
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The secret to making speakers sound great lies with the crossover you use. With the dbx® 234s Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
Tehničke specifikacije proizvoda
- INPUT:
- Connectors: 1/4" TRS
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced >50k ohm, unbalanced >25k ohm
- Max Input Level: >+22dBu balanced or unbalanced
- CMRR: >40dB, typically >50dB at 1kHz
- OUTPUTS:
- Connectors: 1/4" TRS
- Type: Impedance-balanaced/unbalanced, RF filtered
- Impedance: Balanced 200 ohm, unbalanced 100 ohm
- Max Output Level: >+21dBu balanced/unbalanced into 2k or greater
- CROSSOVER FREQUENCIES:
- Stereo Mode: Low/High 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting), Low/Mid 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting), Mid/High: 450Hz to 9.6kHz (x10 setting)
- Mono Mode: Low/Low-Mid 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting), Low-Mid/High-Mid 450 Hz to 9.6 kHz, High-Mid/High 450 Hz to 9.6 kHz
- Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
- FUNCTION SWITCHES:
- Front Panel (Low Cut): Activates 40Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
- Phase Invert: Inverts the phase at the output, one switch per output
- Rear Panel: x10: Multiplies crossover frequency range by 10, one switch per channel
- Mode: Selects stereo/mono and 2/3/4-way operation
- LF sum: Selects normal (stereo) or mono-summed low frequency operation
- INDICATORS:
- Stereo Operation: Green LED
- Mono Operation: Yellow LED
- Low Cut: Red LED per channel, x10 Green LED per channel
- Phase Invert: Red LED per output (3 per channel)
- SYSTEM PERFORMANCE:
- Bandwidth: 20Hz to 20kHz, +0/-0.5dB
- Frequency Response: < 3 Hz to > 90 kHz, +0/-3 dB
- Dynamic Range: > 106 dB, unweighted, any output
- Signal-to-Noise: Ref: +4 dBu, 22 kHz measurement bandwidth
- THD + Noise: < 0.004% at +4 dBu, 1 kHz, < 0.04% at +20 dBu, 1 kHz
- Interchannel Crosstalk: < -80 dB, 20Hz to 20 kHz
- Common Mode Rejection: Ref: +4dBu, 22kHz measurement bandwidth
- Stereo Mode: >94dB (Low Output), >93dB (Mid Output), >90dB (High Output)
- Mono Mode: >94dB (Low Output), >94dB (Low/Mid Output), >92dB (High/Mid Output), >88db (High Output)
- POWER SUPPLY:
- Operating Voltage: 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz
- Power requirements: 15W
- Operating Temperature: 32°F to 113°F (0°C to 45°C)
- PHYSICAL:
- Dimensions: 4.5cm x 17.5cm x 48.26cm
- Weight: 1.8 kg