JBL CONTROL 25-1L-WH nazidni zvučnici
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The Control® 25-1L is a two-way 5-¼” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
Tehničke specifikacije proizvoda
- Frequency Range (-10 dB) 60 Hz to 20 kHz
- Frequency Response (+/-3 dB) 85Hz - 17 kHz
- Power Rating2 200 W Continuous Program (2 hrs)
- Maximum Input Voltage 25.3 V RMS (2 hrs), 50.6 V peak
- Maximum SPL3 110 dB ave. Continuous Pink Noise (116 dB peak)
- Sensitivity4 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
- Coverage Angle5 100° x 100°
- Directivity Factor (Q) 6.04 (averaged 1kHz – 16kHz)
- Directivity Index (DI) 7.6dB (averaged 1kHz – 16kHz)
- Nominal Impedance 8 ohms
- Crossover Type 2nd order low-pass, 3rd order high-pass
- Recommended Protective High-Pass6 60 Hz high-pass (24 dB/oct)
- Low Frequency Driver 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
- High Frequency Driver 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
- Enclosure Material High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
- Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
- Installation InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
- Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
- Termination Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
- Agency Rating ROHS-compliant
- Colors Black (RAL9004) or white (-WH, RAL9016)
- Dimensions (H x W x D)7 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
- Net Weight 3.0 kg (6.7 lbs)
- Shipping Weight 7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
- Included Accessories InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
- Optional Accessories MTC-25UB-1 – Yolk-type U-bracket (&-WH)