JBL CONTROL 50S/T Subwoofer za Loudspeaker Sistem
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
Tehničke specifikacije proizvoda
- Frequency Range (-10 dB) 32 Hz – 200 Hz
- Frequency Response (±3 dB) 50 Hz – 150 Hz
- Power Capacity 300 Watts Continuous Program Power (2 hrs), 150 Watts Continuous Pink Noise (2 hrs), 200 Watts Continuous Program Power (100 hrs), 100 Watts Continuous Pink Noise (100 hrs)
- Nominal Sensitivity (2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
- Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner), 109 dB average, 115 dB peak (center of wall)
- Nominal Impedance 8 ohms (in bypass/thru mode)
- Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
- Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
- Input Connectors Six removable locking 2-pin connectors with screw-down terminals.
- Max wire 12 AWG (2.5 mm2)
- Material Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
- Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
- Wall Bracket: 15 mm (0.6 in) deep
- Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
- Net Weight 9.0 kg (20 lbs)
- Shipping Weight 10.2 kg (23 lbs)
- Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.