Sennheiser Dante™ Kit ME 36 mikrofon
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The MAT 133-S is a rugged and unobtrusively designed table stand. It provides a stable ground for the metal gooseneck MZH 3015 with a length of 150 mm for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered by the SL DI 4 XLR. The ME 36 is a condenser microphone capsule. This mini shotgun microphone features for an outstanding background noise rejection. The SL DI 4 XLR four input Dante-preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.
Tehničke specifikacije proizvoda
- Highest speech-intelliibility
- Phantom power via PoE
- Remote controllable gain level
- Daisy-chaining possible
- Impedance 50 Ω
- Dimensions Ø 8.2 x L96 mm
- Transducer principle (Microphone) pre-polarised condenser microphone
- Frequency response 40 Hz to 20 kHz
- Weight approx. 17 g
- Pick-up pattern super-cardioid / lobar
- Min. terminating impedance 1 kΩ
- Phantom powering P12 to P48
- Equivalent noise level 23 dB(A)
- Equivalent noise level weighted as per CCIR 468-3 34 dB(A)
- Current consumption 250 μA
- Acoustics pressure gradient transducer / interference tube transducer
- Dimensions 120 x 170 x 43 mm (BTH / WDH)
- Connector Mic in: XLR-3F
- Connector Mic out: XLR-3M
- Connector Logic: clip contact for logic, Pin assignment: trigger signal at the logic connector: Logic in (external LED control), GND,
- Logic out (switch signal)
- Weight 1210 g
- Phantom powering P 24 - P 48
- Operating temperature -10° - +50°C
- Current consumption 3.7 mA
- Output voltage Logic out: high level output voltage > 2.4 V, low level output voltage < 0.4 V
- Output voltage Logic in: High level input voltage > 2.0 V, low level input voltage < 0.8 V
- Colour LED light ring: red / green
- Weight 73 g
- Diameter 6 mm
- Phantom powering P12 to P48 V
- Goose neck length 150 mm
- Power consumption 500 mA
- Phantom powering P 48
- Power supply 12 V DC
- Powering 12V DC or 802.3af PoE
- Communication Dante Interface
- Connection Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector