Sennheiser Dante™ Kit MEB 114-S mikrofon
Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
Opis proizvoda
The MEB 114-S is a sturdy on-table boundary layer microphone that constitutes an improvement for any conferencing system. It features a programmable microphone button and a bi-color LED ring for status indication. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114-S ensures the best speech intelligibility. The SL DI 4 XLR four input Dante™ preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.
Tehničke specifikacije proizvoda
- Great speech-intelliibility
- Phantom power via PoE
- Remote controllable gain level
- Daisy-chaining possible
- Dimensions 3.34 x 3.93 x 0.98 in (W x D x H)
- Connector clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
- Frequency response 40 Hz – 20 kHz
- Max. sound pressure level 140 dB
- Transducer principle pre-polarized condenser microphone
- Weight 10.26 oz
- Pick-up pattern cardioid
- Nominal impedance 200 Ω
- Phantom powering P 24 - P 48
- Operating temperature 14 ° to 122 ° F
- Equivalent noise level 29 dB (A)
- Equivalent noise level weighted as per CCIR 468-3 39 dB (CCIR)
- Current consumption 5.3 mA
- Output voltage Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V
- Output voltage Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
- Acoustics boundary layer microphone
- Colour LED light ring: red / green
- Dynamic range 111 dB (A)
- Sensitivity 10 mV/Pa
- SL DI 4 XLR
- Power consumption 500 mA
- Phantom powering P 48
- Power supply 12 V DC
- Communication Dante Interface
- Connection Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector